Flow rack is composed of pillars and slip layers. The slip layers have a certain inclination. The goods are stored in standard swing boxes and cartons. When feeding, the turnover box is slipped through the slip layer. When the goods in the front turnover box are taken out, the empty box is taken out. The rear turnover box is automatically slipped to the pick-up point. It is the best way to store the advanced first out. Flow rack has the following advantages:
1, Flow rack is formed by the beam type rack and the medium rack. The strips are added between the front and back beams of the rack, and the angle is about 4-5 degrees. The goods mainly depend on their own weight and slide from the high end to the lower end automatically. Compared with the other common racks, the structure of flow rack can meet the requirements of the advanced first out. Thus, the work efficiency can be improved.
2, the strips of Flow rack is connected directly to the front and back beam and the middle support beam. The transverse beam is hung directly on the pillar like other racks. The angle of the strips installation is usually determined by the size and weight of the container and the depth of the flow rack. The carrying capacity of the strips roller is 6kg/ only. When the cargo is heavier, it can be in a roll. The path is installed with 3-4 strips. A support beam is usually installed every 0.6 meters in the depth direction to increase the stiffness of strips. When the raceway is longer, the raceway can be separated with a separate plate, and the brake disc is needed to slow the cargo and reduce the impact at the pick end.
3, Flow rack based on the different layer of the B type flow rack and heavy flow rack, B type flow rack is generally three standing or four columns of the majority, depth of 1.2 meters or 2 meters, and the heavy flow rack, the general warehouse rack is mainly to two columns or three stand in the majority, the depth is generally also concentrated in 1.5 meters or in general. It’s about 2 meters.
4. The surface treatment is epoxy resin electrostatic spraying treatment, with strong anti-corrosion, anti-rust effect.
With the above advantages, flow rack is widely used in manufacturing, business, distribution center, assembly workshop and the warehouse flow rack with high shipping frequency: using roll wheel aluminum alloy, sheet metal and so on STIPs, using stand weight to realize advanced first out, convenient storage and suitable for distribution center and other places on both sides of line.
What items is Flow rack suitable for?
Flow rack is indispensable equipment in the storage and distribution link. Like the gravity type rack, flow rack is the type of rack type that uses the weight of the product itself to transport the product from the high end of the rack to the low rack of the rack. The following is the type of items suitable for flow rack:
1, the goods are generally small parts and not heavy goods, mainly stored in the parts box and turnover box, etc., and then by the workers from the high end of the rack by the weight of the product itself to the low end of the rack;
2, it is required that the mode of access to goods is advanced.
3, the cargo is generally loaded at about 200-300kg.
4. Generally, the goods are pipeline, assembly workshop and distribution center, and the shipment frequency is higher.
Jrackingは、様々なパレットラック、カンチレバーラック、電動モバイルラック収納システム、メザニンとプラットフォーム、シャトルカー自動収納システム、プッシュバックラック、ロングスパンラック、リベットラック、ドライブインラック、カートンフローラック、スタッキングラックおよびその他の関連するストレージ機器の生産を専門としています。
Jrackingは、ISO9001、FEM10.2.02、SEMA、AS4084-1993規格をすべての業務に厳格に導入しています。Jrackingは、お客様のオーダーフルフィルメントとマテリアルハンドリングのニーズをすべて満たすために、幅広い製品を提供しています：ティアドロップパレットラック、デキシオンパレットラック、ヨーロッパパレットラック、その他の作業器具。倉庫全体への設置をお考えであろうと、1つの機器をお探しであろうと、Jrackingはお客様のためのソリューションをご用意しています。
