Blogs

The drive in rack is composed of frames, bracket beam, top beam, middle beam, top tie, back tie and so on. This kind of rack is suitable for the storage mode with relatively few varieties and integral whole. Because the forklift truck can drive into the storage area only by arranging the aisle, the warehouse utilization rate is high, and it is mostly used in cold chain logistics, beverages, food, dairy products and other fields.   Drive in rack system has the typical characteristics of FILO. Forklift trucks are usually operated in

1. Civil built cold storage. At present, the large-scale cold storage built in China is basically civil-style cold storage. The building is usually multi-storey, reinforced concrete structure. The cold storage is assembled with PU sandwich cold storage plate inside the structure or sprayed around by PU.   2. Fabricated cold storage. In the past few years, the assembled cold storage is generally used in small-scale assembled cold storage in China. In recent years, with the wide use of steel structure in many large-scale buildings, large-scale steel structure

(2) Safety precautions should be inspected:   A) Setting and updating of load and information signs.   B) No storage location overload.   C) The stability of unit load.   D) The size of unit load.   3 inspection cycle   The inspection of storage racks should be carried out on a regular basis and should be carried out in the following ways:   A) Check daily. The truck driver or other staff inspects the warehouse racks daily. All safety problems and injuries found should be reported

4 unit load placement   (1) No maximum unit load should be placed beyond the supplier’s requirements.   (2) Cargo stacking or pallet storage should not be dropped.   (3) Storage racks should set up warning signs to show their maximum rated load and loading mode. When there are many different loading capacity racks in a warehouse area, the storage racks should clearly display the relevant maximum rated load and loading mode.   (4) The actual size of the unit load shall not exceed the clearance required

Operation of storage racks   1. Conventional racks   (1) Operation process   A) Fork truck loading pallet into tray pallet storage location.   B) The driver opens the fork lift truck and puts the tray horizontally into the compartments between the columns.   C) The driver considers the position of the pallet girder to place the pallet accurately into the appropriate depth of the rack (no contact with the girder until the pallet is lowered).   D) Carefully reduce the tray, place it on the beam, and

Reciprocating shuttle car is mainly composed of body system, conveying device, address recognition device, rail system, safety protection device, electrical device and shuttle vehicle dispatching management.   1. Car body system. The car body system of the shuttle car is mainly composed of a frame body, a walking driving device and an ornamental cover. The frame body is the main body bearing other components, which is mainly welded by shape steel. The driving device consists of a transmission shaft, a driving wheel and a motor. High-tech polyurethane material is

General requirements   1. Not storage racks should be used without acceptance.   2. The operating procedure shall not exceed the maximum operating conditions specified by the supplier, and the following safety working load data provided by the supplier shall be executed:   A) The carrying capacity of the suspended floor.   B) The maximum safe uniform load of each compartment.   C) Maximum safety load per meter length rack.   D) The maximum safety arm and rack load and the position of the center of gravity.   E)

According to the characteristics and needs of customers, racks can be equipped with different warehouse storage systems, such as drive in rack storage system, VNA rack storage system, double depth rack storage system, shuttle rack storage system, gravity rack storage system, push back rack storage system, electric mobile rack storage system. What type of forklift do you need for different rack systems?   Drive in rack storage system Ordinary forklift: Whole racks, no special forklift access, forklift into the racks to access goods.   VNA rack storage system Three-way stacking forklift: guide rail conventional use

1. In warehouse planning, the rack manufacturer can be required to increase the width of the drive in rack corridor appropriately, and reserve some safety distance for the driver in advance, so as to reduce the collision between the forklift and the bracket.   2. Adding a protective cover to the bracket or guardrail, although this method can reduce the damage caused by forklift trucks to the racks, it also provides opportunities for drivers with poor technical level, making it difficult for managers to judge the driver’s