Blog

The cantilever racking system column mostly adopts cold-rolled steel or H-shaped steel,the arm adopts square tube, cold-rolled steel or H-shaped steel.The column and the arm are connected by lock pin or bolt connection.The base is made of cold-rolled steel or H-shaped steel. The columns are connected by H-bracing and X-bracing.The H-bracing is generally made of a rectangular tube, and the X-bracing is made of round tube. Figure 1. CX cantilever racking system (made of cold-rolled steel) Figure 2. H-shaped steel cantilever racking system (made of cold-rolled steel)

Why need to put heavy duty racks in our warehouse? Companies Have an Increasing Need for Space as companies continue to expand product lines while shrinking overhead expenses, the need for safe and efficient storage continues to grow. Few companies have the luxury to increase their facility footprint or move, and when they do, it’s expensive. Further increasing the need for space are efficient manufacturing methods calling for sub-assemblies as well as higher raw material inventory (in some cases) being carried to allow for longer overseas lead

The warehouse pallet racks’aisle is the passageway between racks. It is the space reserved for people or forklifts and other mechanical equipment to operate. Pallet rack is the main product of our company and many other companies. How to appropriately design the aisle of the warehouse pallet racks, and what is the basis? There have been such cases in other rack factories. As a result of inaccurate data, the aisle width of the warehouse pallet racks was too narrow, the forklift could not well turn while loading

Mobile racking system is the most common form of density storage, with the aid of forklift to access the goods. Its space utilization rate can reach more than 85%. The mobile rack system is made up of track (or guide device), trolley (walking device), motor, rack, detection device, operation panel and software control system. According to the rail style, it is divided into rail type and non-rail type. A.Guide rail Guide rail mobile rack system need notching, rail laying, pouring and rail maintenance. It is suitable for

Drive in pallet rack is a high density storage system used in warehouses to store pallets on a first in/last out(FILO) basis. Pallets are loaded and retrieved from the front side of the rack and forklift trucks drive directly into the rack’s bays to get to the stored product. The last pallet loaded becomes the first pallet accessible, creating a more dense and uniform load in a confined storage area. When compared to conventional selective rack systems, the same amount of storage can be achieved in a much tighter area with

By using pushback rack systems from Jracking Storage Solutions, you can double or triple your storage capacity when compare to standard pallet rack or double deep racking systems.   What is Push Back Racking? Push back racking is a pallet storage method that allows pallets to be stored from 2 to 6 deep on either side of an aisle, giving you higher storage density than other forms of racking.     How Push Back Racking Works? A push back rack system contains a pair of inclined rails and