Blog

Automated warehouse has been used more and more widely because of its advantages of saving land, improving storage efficiency, improving the timeliness and accuracy of warehouse management. Many warehouses are upgraded to automated warehouse. Because of the limit of space, this article no longer describes the contents of the form and classification of the three-dimensional warehouse, and mainly introduces the planning and purchase of the automated warehouse.   The main design principles of automated warehouse systems generally follow the following principles:   1. High performance and low

In order to complete the design of an automated warehouse, the planning and design steps should be organized by the relevant experienced technicians.   1. Demand analysis: the requirements and data put forward by the buyer are summarized, analyzed and arranged, and the design goals and standards are determined. The feasibility, time schedule, organizational measures and other factors that affect the design should be carefully studied.   2. Determine the form and specification of cargo unit: Based on the investigation and statistical results, and considering various factors, determine

Obviously, a very important topic about implementation is how long it will take to install and debug. The construction of a standard warehouse and installation of general equipment usually takes no more than one year. If we can find suitable housing, the construction period will be further shortened.   However, the implementation of fully automated systems takes quite a long time. The most time-consuming and crucial step is to develop the WMS warehouse management system. Do not underestimate the time that may be spent, and set an

In general, the automatic storage system (AS/RS) can carry 40-50 pallets per hour in each lane, which is related to the height and width of the laneway, the physical characteristics of the pallet, the high and low space between the shelves, and so on. If the elevator needs to change laneway, the time of single conversion and the frequency of conversion will affect the speed of operation.   Light shelving can be used to store containers. By automatic storage, 80-100 containers can be stored in each lane

1. We must examine the project and focus on the actual business needs, rather than automation for automation. When considering automation, it is also necessary to consider manual operations that are compatible with it. As a matter of fact, there is basically no solid warehouse which is a real three-dimensional warehouse. Any stereoscopic warehouse is a combination of automation and manual work. When planning a project, a plan database is needed. Generally speaking, the throughput, storage capacity and the type of order goods should be taken into

3. Design and planning of rack steel structure in cold chain storage environment   Through the design planning and thinking of the rack structure in the cold chain storage environment, the focus of the design of the equipment related to the cold chain storage is analyzed, and each influence factor is strictly controlled. The performance advantages of equipment are fully played, and the characteristics of different equipment are complementation, from the angle of the whole system of cold chain storage. We should optimize, rationally layout and manage