Blog

Storage can be roughly divided into two types from material form: one is pallet storage form. The other is box storage form. Following is a description of common schemes for pallet storage:   Pallet storage is suitable for the storage of large items, that is, the average storage volume of a single SKU is relatively large.   Pallet storage currently has pallet stacking storage; pallet rack + forklift storage; pallet rack + VNA forklift storage; drive in rack + forklift storage; shuttle rack + forklift storage; ASRS storage.   1.1 Pallet stacking storage

Intelligent storage system is an intelligent warehouse that stores goods on high-rise steel racks, accesses and stores goods with roadway stacking crane cooperating with other loading and unloading handling systems around it, and is managed and controlled by computer in an all-round way.   Enterprises are upgrading their warehousing systems because of these attractive advantages: 1. Replacing land with space, reducing land cost and expanding storage capacity; 2. Reduce labor intensity and labor cost of workers; 3. Improving delivery accuracy; 4. Shorten supply chain cycle   1.

1. Design standard   JB/T 5323-91 steel rack technical conditions;   ZBJ83015-89 code for design of high-rise warehouse;   Specification for design of FEM10.202 European material handling industry of steel racks;   2. Product features   Upright and H bracing, D bracing and the footplate are connected by bolts, bolts for high strength bolts 4.8 galvanized;   The whole beams punch forming, effectively prevent the severe impact, greatly improves the loading capacity;   The upright can be adjusted up and down according to the pitch. Each layer of the

Structural continuity collapse refers to structural failure caused by accidental loads, which leads to continuous failure of components connected with failure components, leading to collapse failure in a wider range than the initial local failure. The consequences of continuous collapse are very serious, and the causes are not proportional to the losses. Rack structure, due to its own characteristics, is prone to continuous collapse.   First of all, the rack structure has low redundancy and no redundant components. After the failure of a single column, there is

1. Rack Types There are three ways to store goods on racks: manual storage, forklift storage and automatic storage, depending on which way you access goods, to choose the storage racks, according to their current development and future development direction. 2. Quality High-quality racks are guaranteed by the thickness of the steel and racks on the racks. Only when the base is well laid can the racks be used for a long time. The rack structure can also determine the quality of a rack. The separators can

Another expression of this question is, should racks be collision-proof? It is well known that racks are used in conjunction with handling equipment. Most racks are equipped with forklifts. It is almost inevitable that forklift collide with racks due to misoperation. However, the accidental loads caused by forklift impact are not considered in the design standard of the rack structure (the dynamic loads of forklifts when loading and unloading goods are given in the mature European rack design standard EN15512, which reflects the good operation of forklifts.